2018 PSLE Discussions & Strategies (Born in 2006)

[Betay]

Same here, my son also said his answer was 3. When I show him the diagram drawn in ksp forum, he said it was different from what he saw in the question. I didn’t ask him how he got 3.

[snowmummy]

Zappy:

snowmummy:

May I know how the t-score is calculated and applied for the PSLE result? I’m kinda confused... thanks!

T-score uses this formula:
T = 50 + 10[(x-m)/s]
where x is the candidate’s mark for the subject
m is the average mark (mean) scored by all the candidates
s is the spread of the marks around the average mark (standard deviation)

Each subject has a score calculated from that formula. Then add up all 4 subjects = the magic 3 digit number in November.

Thanks a lot!

[optmum]

smilestaff:

Yup, DC saw 9 cubes also and came up with the answer 3.

How many marks was this question, I read someone say 3 marks, but my daughter says identifying how many sides is the second part of the question worth 1 Mark, the 1st part was to draw the side view which she had it right, hopefully.

Yes it was the 2nd part of the question and it was 1 mark.

[snowmummy]

Bubbly Ang:

snowmummy:

May I know how the t-score is calculated and applied for the PSLE result? I’m kinda confused... thanks!

You can refer to Seab website for actual formula. But it involves a std deviation value which we will never know. Depends on cohort performance.
As a rough gauge on your child performance, you can simply x0.72 to get the total aggregate.

Thanks a lot!

[lee_yl]

It is not surprising that some kids saw 9 cubes as my girl initially thought she saw 9 cubes too !!


It was only after she read the question carefully and she saw that it was stated clearly that the figure was made up of 8 cubes, then she realised that there was no cube in the middle.

[shirishj]

puff:

lee_yl:

I am curious why that school teacher and tutor say it’s choice (4).


Btw, a sponge soaked with water is call a solid+liquid mixture. And can a solid ball be hollow, strictly speaking, no, else we are just playing with words

Thanks for the clarify a soaked sponge ball is not consider a solid. Steel solid ball could float on water due to
surface tension with precise calculation. So same material solid ball could sink or float depending on how it is place in the water. This sci qn have too many possibility how to say ans 4 is wrong.

personally, i think they should have set not possible to tell as the answer

[lee_yl]

puff:

lee_yl:

I am curious why that school teacher and tutor say it’s choice (4).


Btw, a sponge soaked with water is call a solid+liquid mixture. And can a solid ball be hollow, strictly speaking, no, else we are just playing with words

Thanks for the clarify a soaked sponge ball is not consider a solid. Steel solid ball could float on water due to
surface tension with precise calculation. So same material solid ball could sink or float depending on how it is place in the water. This sci qn have too many possibility how to say ans 4 is wrong.

Even if the solid metal ball can float on water due to surface tension and with precise calculations, say diameter must not exceed 2.6cm, then how can balls Y and Z made of the same material and identical, one end up floating and one sinking?

This question just wanted to test on the P3 material topic, and density is not within the PSLE syllabus.

[puff]

lee_yl:

puff:

[quote=\"lee_yl\"]I am curious why that school teacher and tutor say it’s choice (4).


Btw, a sponge soaked with water is call a solid+liquid mixture. And can a solid ball be hollow, strictly speaking, no, else we are just playing with words

Thanks for the clarify a soaked sponge ball is not consider a solid. Steel solid ball could float on water due to
surface tension with precise calculation. So same material solid ball could sink or float depending on how it is place in the water. This sci qn have too many possibility how to say ans 4 is wrong.

Even if the solid metal ball can float on water due to surface tension and with precise calculations, say diameter must not exceed 2.6cm, then how can balls Y and Z made of the same material and identical, one end up floating and one sinking?

This question just wanted to test on the P3 material topic, and density is not within the PSLE syllabus.[/quote]Agree that ans 2 shouldn't be wrong if base on the p3 material topic tat is being taught. However ans 4 shouldn't be wrong either as there are too many possibility tat 2 same material can float or sink.

Floating due to surface tension can make material either float or sink .if u throw in the material with force it will sink ...if u place it gently enuff it will float ....mostly this experiment is done using needle but with very precise calculation it can be done on ball too.
Don't know if it is applicable to their sci qn but like i says too many possibility for this qn hence hard to says ans 4 is wrong.

What abt cotton ball ...1 cotton ball could have placed in the water first when it sink i place another cotton ball in hence the image of 1 floating cotton ball n 1 sink cotton ball.

[Sivak222]

Sctc:

I think the question did mention something like the pistil will fall off first followed by the stamen, meaning that they mature at different timing, that will prevent self pollination. I may be wrong.

As per my DS understanding, Male part and female part of flower bloomed at same time and live for 7 days after that either one fall off first, after 2 days next one fall. There is high chance to pollinate by insect with same flower.

[pungg]

Sivak222:

Sctc:

I think the question did mention something like the pistil will fall off first followed by the stamen, meaning that they mature at different timing, that will prevent self pollination. I may be wrong.

As per my DS understanding, Male part and female part of flower bloomed at same time and live for 7 days after that either one fall off first, after 2 days next one fall. There is high chance to pollinate by insect with same flower.

As per my DS also insect one flower( with same flower). Don't know which one is correct?