Happy Call Korean Frying Pan

[sunshine05]

For health concerns, which is the best?

1. stainless steel
2. standard Happycall
3. Happycall Ocher

Is the coating on Ocher the same as the standard Happycall pans?

Does Ocher crack / breakable if accidentally knocked / dropped?

Thanks.

[superbmothers]

Hi Sunshine05


If you are talking about health, 3 of them are good. Ocher Best, HappyCall Second and Lastly Stainless Steel. It is not very difficult to figure out, just ponder this question. Claypot, ZiSha, Ceramic Pot or Stainless Steel, Metal Wok, Tefal cooks better food? Chances are the first 3 type and happycall fall into creamic and ocher fall into creamic + clay.

For maintenance. The worse case senario is charred due to salty, sugar, carbonated food, Stainless Steel can was easily but some stain still has to call the guy to scrub, happycall and ocher eliminate the issue. The other pot, claypot, zisha, tefal, non stainless steel pot except for ceramic coated pot, all the result, you and i can predict.

Ocher and Happycall are aluminium based then coated with ceramic and clay (ocher), therefore like tefal, no hard scrubbing. The joints i don’t think is make of metal so if dropped i think the joint will break, not the casing

[shurley197323]

Finally,received my Happycall after long wait of 10 days from Starshop. Try to fill the pan half fill with water and turn it around. No leakage!

Will update again after trying my first dish.

[BigDevil]

:congrats:


10 days...minus 2 weekend days is 8 working days.
So same turn around as BestGmall.

[sunshine05]

How are Magic Call and Poong Nyun pans compared to Happy Call pans?


Thanks.

[kitty2]

Is this pan heavy?

[shurley197323]

Can someone advice me? I jusy bought "Frozen saba fillet" from NTUC. Am I suppose to deforst first or just cook it straight from frozen using Happycall?

[ksme]

kitty2:

Is this pan heavy?

Depending on the size, I think it ranges from 1.6kg to 2kg.

[ksme]

shurley197323:

Can someone advice me? I jusy bought \"Frozen saba fillet\" from NTUC. Am I suppose to deforst first or just cook it straight from frozen using Happycall?

My understanding is no need to defrost when using HPC pan. But better wait for others to respond since I have not personally tried this pan yet.

[shurley197323]

ksme:

shurley197323:

Can someone advice me? I jusy bought \"Frozen saba fillet\" from NTUC. Am I suppose to deforst first or just cook it straight from frozen using Happycall?

My understanding is no need to defrost when using HPC pan. But better wait for others to respond since I have not personally tried this pan yet.

Ok. Thanks. because I am not so good at cooking too. I just wonder how to marinate the teriyaki sauce :?